Барлық Санаттар
EN

Басты>жаңалықтар

Жоғары қысымды шланг түйінін қалай орнатуға болады

Уақыты: 2022-09-02 Қаралды: 1

(1) Rubber hose in moving or stationary, can not be overly bent, can not bend at the root, at least 1.5 times the diameter of the beginning of the bending;

 

(2) When the rubber hose moves to the extreme position, it should not be pulled too tight and should be more relaxed;

 

(3) Try to avoid torsional deformation of rubber hose;

 

(4) hose as far as possible away from the thermal radiation component, it is necessary to fashion heat insulation board;

 

(5) The external damage of the rubber hose should be avoided, such as long-term friction on the surface of the same component in use;

 

(6) If the hose weight causes excessive deformation, there should be supporting parts.